VOLVO
ECM-1890 - Swirl actuator control. Jammed
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The swirl damper position is checked against a calculated value by the ECM. If the swirl damper is stuck and cannot be moved to the correct position, the code is set. This can be caused by a sticking linkage or damper, or by a sticking or damaged swirl damper motor. The fault gives a message in the information display.
Mulige årsaker
- Linkage or swirl damper sticking
- The swirl damper has jammed in the channel
- Damaged linkage between the swirl throttle motor and the swirl channel
- Swirl damper motor sticking
- Damaged swirl throttle motor
Hva du kan gjøre
- 1Read and clear the fault code and check whether it returns
- 2With the ignition off, check that the swirl channel is free from dirt and soot so the damper can move
- 3Check that the linkage between the swirl damper motor and the swirl channel is not damaged or catching
- 4If you have a diagnostic tool, activate the swirl damper motor and listen for a ticking sound
- 5Have a workshop replace the swirl damper motor or linkage if the fault remains
Symptomer du kan merke1
- A message appears in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.