VOLVO
ECM-2110 - Front heated oxygen sensor (HO2S), heating. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Vis modeller per årsmodell og motor (19)
- Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
- Volvo S60 (2001–2009)2001, 2009Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
Hva betyr feilkoden?
The engine control module (ECM) checks the heater circuit of the front oxygen sensor shortly after the ignition is switched on. If the circuit is short-circuited to ground or supply voltage, or has an open circuit, the code is set. The fault can come from the wiring to the sensor or from a damaged sensor.
Mulige årsaker
- Signal wire short-circuited to supply voltage
- Open circuit in the signal wire
- Signal wire short-circuited to ground
- Damaged oxygen sensor or damaged sensor control circuit
Hva du kan gjøre
- 1Read and clear the fault code and check whether it returns
- 2Check that the connector at the front oxygen sensor is firmly seated and free from oxidation; do not use penetrating spray or grease on it
- 3Check the wiring to the oxygen sensor for chafing, pinch damage and loose contacts
- 4Use a multimeter to check that the heater wire to the oxygen sensor has no open circuit and is not short-circuited to ground or supply voltage
- 5Have a workshop replace the oxygen sensor if the fault remains after these checks
Symptomer du kan merke1
- The malfunction indicator lamp (MIL) is lit
Hva feilen kan påvirke1
- Fuel trim and the front sensor heater are switched off after repeated restart attempts by the sensor control
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.