VOLVO
ECM-2300 - Injector cylinder 1. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Vis modeller per årsmodell og motor (19)
- Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
- Volvo S60 (2001–2009)2001, 2009Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
Hva betyr feilkoden?
The engine control module (ECM) monitors the injector control wire for cylinder 1. The code is set when the signal reads high, reads low or is absent. The fault can be intermittent and sometimes comes from poor contact in the injector connector.
Mulige årsaker
- Contact resistance or oxidation in the injector connector
- Signal wire short-circuited to supply voltage
- Signal wire short-circuited to ground
- Open circuit in the signal wire
- Damaged injector
Hva du kan gjøre
- 1If you have a diagnostic tool: activate the injector for cylinder 1 and listen for a click from the injector when it is activated
- 2Check that the connector to the cylinder 1 injector is secure and free from oxidation and contact resistance
- 3Use a multimeter to check that the wire to the injector has no break and is not shorted to ground or supply voltage
- 4Clear the code and road test to see whether it returns once the connector has been checked
- 5If the fault remains, have a workshop check the injector and its wiring
Symptomer du kan merke3
- Malfunction indicator lamp (MIL) lit
- Engine not firing on all cylinders
- Engine cranks normally yet refuses to start
Hva feilen kan påvirke1
- Lambda control is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.