VOLVO
ECM-2310 - Injector cyl 1. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (26)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) monitors the signal to the injector for cylinder 1 and checks that it works. A signal that reads high, reads low or is faulty sets the code. The fault can be in the injector or in the wiring between the injector and the control module.
Mulige årsaker
- Signal wire short-circuited to supply voltage
- Signal wires short-circuited to each other
- Signal wire short-circuited to ground
- Open circuit in the signal wire
- Contact resistance or oxidation in the connectors
- Damaged injector
Hva du kan gjøre
- 1Check that the connector to the cylinder 1 injector is secure and free from oxidation and contact resistance
- 2Use a multimeter to check that the signal wire to the injector has no break and is not shorted to ground or supply voltage
- 3If you have a diagnostic tool: activate the cylinder 1 injector and listen for a click from the injector
- 4Check that the wiring in the engine bay is intact and not chafed, especially where it connects to the injector
- 5If the fault remains, have a workshop check the injector and its wiring
Symptomer du kan merke2
- Engine fails to start
- Message in the display
Hva feilen kan påvirke1
- Fuel injection to cylinder 1 stops
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.