VOLVO
ECM-233C - Rear heated oxygen sensor (HO2S), bank 2. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (1999–2006), XC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) controls the heating of the rear oxygen sensor on bank 2. The code is set when the signal is too high while heating is active. The signal wire may have touched a supply voltage, or the sensor may be damaged.
Mulige årsaker
- Signal wire short-circuited to supply voltage
- Damaged oxygen sensor
Hva du kan gjøre
- 1Read and clear the code, then road test to see whether it returns
- 2Look for chafing and pinched wiring on the signal wire to the bank 2 sensor
- 3Check that the sensor connector has not taken in moisture or corrosion
- 4If you have a diagnostic tool: read the sensor signal in live data while the engine runs and see whether it sits too high
- 5If the fault remains, have a workshop decide whether the sensor should be replaced
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Hva feilen kan påvirke1
- Lambda control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.