Hva betyr feilkode ECM-2360?

Diagnose og feilkodedefinisjon for ECM-2360 (Volvo S80 (1999–2006), Volvo S80 (1999–2006), Volvo S80 (1999–2006)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-2360 - Injector 6. Signal missing. Intermittent fault

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

2 modeller

S80 (1999–2006), XC90 (2003–)

Vis modeller per årsmodell og motor (4)

Hva betyr feilkoden?

The signal to injector 6 has dropped out briefly but is not present now. The fault is sporadic and may lie in the connector, the wire to the valve or the feed from the system relay.

Mulige årsaker

Open circuit in the signal wire
Open circuit in the power supply to the injector
Contact resistance in the connections

Hva du kan gjøre

1Check that the connector to injector 6 is secure and free from oxidation and play
2With the ignition on, press gently on the connector at valve 6 and see whether the signal briefly drops out
3Use a multimeter to check that the feed from the system relay to injector 6 is not interrupted
4If you have a diagnostic tool: note the fault status after a test drive and judge whether the fault is permanent or temporary
5If the fault remains, have a workshop decide whether the wiring or the valve needs attention

Symptomer du kan merke2

Engine not firing on all cylinders
Malfunction indicator lamp (MIL) lit

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.