VOLVO
ECM-243B - Front heated oxygen sensor (HO2S), bank 1. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
Although the code is titled signal missing, it applies when the voltage for the oxygen sensor heater disturbs the sensor signal. The ECM watches the signal from the front sensor on bank 1 and stores the code when the heater voltage affects it.
Mulige årsaker
- Short circuit between one of the heater cables for the oxygen sensor and the sensor's other signal cables
- Damaged front heated oxygen sensor
Hva du kan gjøre
- 1Read the code, clear it and road test to see whether it returns
- 2Make sure the oxygen sensor connector is fully engaged and clean. Do not use rust solvent spray or grease in it
- 3Follow the cables from the oxygen sensor and look for chafing and damaged insulation, especially near the exhaust pipe
- 4Use a multimeter to check that the heater cables are not short-circuited to the sensor's other signal cables
- 5If the cables are intact, have a workshop with diagnostic equipment decide whether the oxygen sensor needs replacing
Symptomer du kan merke1
- The malfunction indicator lamp (MIL) is lit
Hva feilen kan påvirke2
- Oxygen sensor control is switched off
- Catalytic converter diagnostics are switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.