Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-2456
    VOLVO

    ECM-2456 - Pressure sensor, particle filter. Signal missing

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Kun motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo S40 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Kun motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6
    • Volvo V50 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Kun motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Kun motor: D4204T · Kun girkasse: MMT6, MPS6

    Hva betyr feilkoden?

    The ECM compares pressure readings from each side of the particle filter and checks that the sensor signal follows a calculated value. If the signal is missing altogether, the code is stored. The cause can be a poor connection, an open circuit in the wiring or a damaged pressure sensor.

    Mulige årsaker

    • Loose connections, contact resistance or oxidation at the terminals
    • Open circuit in the supply cable to the sensor
    • Open circuit in the ground lead
    • Open circuit in the signal cable
    • Damaged particle filter pressure sensor

    Hva du kan gjøre

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Look at the terminals on the pressure sensor and make sure they are fully seated, not loose and clean
    3. 3Follow the supply, ground and signal leads from the sensor and look for breaks, chafing and pinch damage
    4. 4Use a multimeter to check that each lead is continuous all the way between the sensor and the control module, with no break
    5. 5If the leads are intact, have a workshop with diagnostic equipment check the pressure sensor

    Symptomer du kan merke2

    • The check engine light comes on
    • Poor performance, the car lacks power

    Hva feilen kan påvirke1

    • Engine output and speed may be limited

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.