VOLVO
ECM-24A0 - Engine control module (ECM). Internal fault
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) has detected a fault in its own system for controlling the injection valves. The fault may be caused by system voltage that is too low, damaged injection valves, a software fault or an internal fault in the control module.
Mulige årsaker
- System voltage too low
- Damaged injection valves
- Software fault in the engine control module (ECM)
- Internal electronic fault in the ECM
Hva du kan gjøre
- 1Check that the battery has sufficient voltage, since system voltage that is too low can cause the fault
- 2Read and note the code, clear it and try starting the engine to see whether it returns
- 3Follow the cables to the injection valves and look for open circuits, chafing and loose connectors
- 4Use a multimeter to check that the cables to the injection valves have no open circuit
- 5If nothing is found, have a workshop with diagnostic equipment decide whether the control module needs replacing or reprogramming
Symptomer du kan merke1
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.