VOLVO
ECM-2560 - Fuel system. Pressure too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
At certain operating modes, with the engine warm, the engine control module (ECM) regulates fuel pressure using the fuel flow control valve. If the pressure in the fuel system is too high compared with what the ECM expects, the code is set. The fault may be caused by air in the lines or by a component that does not receive the correct voltage.
Mulige årsaker
- Air in the fuel lines
- The fuel flow control valve has no voltage supply
- Damaged fuel pressure sensor
- Damaged fuel flow control valve
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check that the fuel pressure sensor connector is secure and free from oxidation and contact resistance
- 3Use a multimeter to check that the wire to the fuel flow control valve is not open circuit
- 4Think about whether any work has recently been done on the fuel system, since air can enter the lines when it is opened
- 5With diagnostic equipment, follow the fuel pressure sensor's live data with the engine warm and see whether the value keeps up when you accelerate
- 6Have a workshop check the voltage supply to the fuel flow control valve and replace the valve if the fault remains
Symptomer du kan merke2
- Message in the display
- The engine knocks
Hva feilen kan påvirke1
- The engine control module works out a fuel pressure value instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.