VOLVO
ECM-2565 - Position sensor turbocharger (TC). Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4204T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4204T
- Volvo V50 (2004–2013)2004–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4204T
Hva betyr feilkoden?
The turbocharger vacuum actuator has a built-in position sensor, and the engine control module (ECM) compares its signal with the value it should have. If the signal is too high, the ECM treats it as a fault and the code is set.
Mulige årsaker
- Signal wire shorted to supply voltage
- Supply wire shorted to supply voltage
- Damaged position sensor
Hva du kan gjøre
- 1Clear the code and road test the car, then check whether it returns
- 2Check that the connector at the position sensor is secure and free from moisture and oxidation
- 3Use a multimeter to check that the wires to the position sensor are not in contact with live wiring
- 4With diagnostic equipment, read the sensor value with the ignition on and see whether it sits above its normal range
- 5Have a workshop check the position sensor and the wiring if the fault returns
Symptomer du kan merke1
- The malfunction indicator lamp (Check engine) lights up or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.