VOLVO
ECM-2584 - Additive dosing module (ADM). Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4204T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4204T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4204T
Hva betyr feilkoden?
This is a follow-on code: the engine control module (ECM) has received a message on the CAN network about an emissions-related fault in the additive dosing module (ADM), or has found that communication between the modules is not working. The root fault lies in the ADM or the central electronic module (CEM) and should be fixed first. The code can then be erased.
Mulige årsaker
- A fault in the additive dosing module (ADM)
- A fault in the central electronic module (CEM)
- Faulty communication on the CAN network between the modules
Hva du kan gjøre
- 1Read the fault codes in the additive dosing module (ADM) first, then in the central electronic module (CEM)
- 2Fix the root faults according to their codes, then erase this code
- 3Check the condition of the battery and that its terminals are tight, since low voltage can cause communication faults
- 4Have a workshop check the CAN network communication if the ADM or CEM cannot be read
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.