Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-2610
    VOLVO

    ECM-2610 - Fuel pump (FP) control module. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (8)
    • Volvo C30 (2007–2013)2007–2011Kun motor: B5244S4
    • Volvo C70 (2006–2013)2006Alle motorer unntatt: B5254T3
    • Volvo C70 (2006–2013)2007–2010Kun motor: B5244S4, B5244S5
    • Volvo C70 (2006–2013)2011Kun motor: B5244S4
    • Volvo S40 (2004–2013)2004Kun motor: B5244S4, B5244S5
    • Volvo S40 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7
    • Volvo V50 (2004–2013)2004Kun motor: B5244S4, B5244S5
    • Volvo V50 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7

    Hva betyr feilkoden?

    The ECM monitors the control signal that goes to the fuel pump control module. If it registers a fault in that signal, the code is set. The fault may be a result of electrical faults in the fuel pump supply or its wiring.

    Mulige årsaker

    • Contact resistance, oxidation or loose contact in connectors and connections
    • Signal wire between the ECM and the pump control module shorted to ground
    • Open circuit in the signal wire between the ECM and the pump control module

    Hva du kan gjøre

    1. 1Read the fault codes in the central electronic module (CEM) first, since this code may be a follow-on fault from electrical faults in the fuel pump supply
    2. 2Check the fuse and relay for the fuel pump control module and the fuel pump
    3. 3Check the earth point for the fuel pump control module and the fuel pump
    4. 4Check the connectors at the fuel pump control module for poor contact and oxidation
    5. 5Have a workshop check the fuel pump and its control module if the fault remains

    Symptomer du kan merke5

    • Malfunction indicator lamp (MIL) on
    • Poor performance and the engine lacks power, especially when pulling away from a standstill
    • The engine hesitates or surges during acceleration or deceleration
    • The engine stalls, including at idle
    • The engine is hard to start or does not start

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.