VOLVO
ECM-274D - Engine coolant temperature (ECT) sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (24)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo S80 (1999–2006)2006Kun motor: B5204T5, B5254T2
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2006–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) works out the engine temperature after start, taking into account time since start, engine speed and load. If the sensor signal is below the calculated temperature, the code is set.
Mulige årsaker
- Contact resistance and oxidation in the connector
- Damaged engine coolant temperature sensor
Hva du kan gjøre
- 1Disconnect the electric cooling fan connector before you begin, so the fan does not start by itself
- 2Check the connector on the temperature sensor for contact resistance and oxidation
- 3Check the coolant level and freeze protection, since a frozen sensor can cause this code
- 4Have a workshop check whether the thermostat opens as it should
- 5Have a workshop replace the coolant temperature sensor if the connector is in good condition and the fault remains
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) on
- The engine is hard to start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.