VOLVO
ECM-275D - Engine coolant temperature (ECT) sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2006Kun motor: B5204T5, B5254T2
- Volvo V50 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2006–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
At engine start the ECM stores the readings from the intake air, fuel and coolant temperature sensors and compares them. If the coolant temperature sensor reads too far below the others, the code is set.
Mulige årsaker
- The coolant temperature sensor is broken
- Poor contact in the connections, with resistance or oxidation
Hva du kan gjøre
- 1With diagnostic equipment, read the engine temperature at start and compare it with the intake air and fuel temperatures
- 2Disconnect the electric cooling fan connector before you begin, since the fan can run even when the ignition is off
- 3Check the coolant temperature sensor's connector for looseness, oxidation and contact resistance
- 4Check that the coolant level and freeze protection are in order, since a frozen sensor can read too cold
- 5Have a workshop replace the coolant temperature sensor if the connector is in good condition and the fault remains
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) on
- The engine is hard to start
Hva feilen kan påvirke1
- The engine temperature is calculated using a model
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.