VOLVO
ECM-2800 - Heated oxygen sensor (HO2S) signal. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) uses the signal from the heated oxygen sensor to regulate the fuel and air mixture. The fault is stored when the control module detects that the sensor signal is wrong, for example too high, too low or missing altogether. The cause may be the sensor, the wiring between the sensor and the control module, or the connectors.
Mulige årsaker
- Damaged heated oxygen sensor (HO2S)
- Signal cable short-circuited to supply voltage, giving a signal that is too high
- Signal cable short-circuited to ground, giving a signal that is too low
- Open circuit in the signal cable, so the signal is missing
- Contact resistance or oxidation in the connections
Hva du kan gjøre
- 1Read the code, clear it and drive for a while to see whether it returns
- 2Switch off the ignition and check the oxygen sensor connector: it should be secure, clean and free from oxidation
- 3Check that the signal cable from the oxygen sensor is not chafed or pinched and does not run against hot parts of the exhaust system
- 4With the car switched off, use a multimeter to check that the signal cable is not broken and has no contact with ground or supply voltage
- 5If you have a diagnostic tool: check in live data that the oxygen sensor value changes while driving. A value that stays completely still indicates a faulty signal
Symptomer du kan merke1
- Message in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.