VOLVO
ECM-2810 - Heated oxygen sensor (HO2S). Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The oxygen sensor tells the engine control module (ECM) about the fuel and air mixture. When the signal is wrong, for example too high, too low or missing, the code is set. The cause may be the sensor, the wiring or the connections.
Mulige årsaker
- Damaged oxygen sensor
- Signal wire shorted to supply voltage, giving too high a signal
- Signal wire shorted to ground, giving too low a signal
- Break in the signal wire, so the signal is missing
- Contact resistance or oxidation in the terminals
Hva du kan gjøre
- 1Read the code, clear it and drive for a while to see whether it returns
- 2Switch off the ignition, unplug the oxygen sensor connector and look for oxidation, corrosion and loose connections
- 3Check that the signal wire is not chafed or pinched
- 4With the car switched off, use a multimeter to check that the signal wire is not broken and has no contact with ground or voltage
- 5If you have a diagnostic tool: watch the oxygen sensor value in live data while the engine idles. A value that does not change at all suggests the sensor or its wiring
Symptomer du kan merke1
- Message in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.