VOLVO
ECM-2A1C - Fuel temperature sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2006Kun motor: B5204T5, B5254T2
- Volvo V50 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2006–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The control module saves the fuel, intake and engine temperature readings at the moment of start and compares them afterwards. The code is set when the fuel temperature is too far above the others. The cause may be a damaged fuel temperature sensor or poor contact in the connections.
Mulige årsaker
- Damaged fuel temperature sensor
- Contact resistance or oxidation in the connections
Hva du kan gjøre
- 1With a diagnostic tool, read the fuel temperature in live data at the moment a cold engine starts and compare it with the intake and engine temperatures
- 2Switch off the ignition and check the connector at the fuel pressure sensor for contact resistance and oxidation
- 3Start the engine, let it run for a while and read the code again to see whether it returns
- 4If the connector is in order but the fault remains, have a workshop check the fuel temperature sensor with diagnostic equipment
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Hva feilen kan påvirke1
- A predefined value is used for the fuel temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.