VOLVO
ECM-2A1D - Fuel temperature sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2006Kun motor: B5204T5, B5254T2
- Volvo V50 (2004–2013)2006–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2006–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) has registered that the signal from the fuel temperature sensor is too low. At start-up the module compares the fuel temperature with the intake air and engine temperatures, and the fuel temperature reading is too low compared with the others. The fault code concerns the signal from the sensor.
Mulige årsaker
- Damaged fuel temperature sensor
- Contact resistance or oxidation in the connections
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the connector at the fuel temperature sensor for loose connections, corrosion and contact resistance
- 3Read the fuel, intake and engine temperatures in live data right at start-up. If the fuel temperature differs clearly from the others, the sensor or its connector is the likely cause
- 4The sensor is built into the fuel pressure sensor. If the fault remains, have a workshop check or replace it
Symptomer du kan merke1
- The malfunction indicator light (MIL) is on
Hva feilen kan påvirke1
- The control module uses a fixed predefined value for fuel temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.