VOLVO
ECM-2AA0 - Particulate filter temperature sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The ECM keeps watch on exhaust gas temperature. The fault code is set when the signal from the temperature sensor upstream of the particulate trap is faulty, which can be caused by a short circuit, an open circuit or poor contact in the sensor wiring, or by a damaged sensor.
Mulige årsaker
- Contact resistance, oxidation or open circuit in the connections
- Signal wire short-circuited to ground
- Damaged temperature sensor for the particulate trap
Hva du kan gjøre
- 1Check the connector at the temperature sensor for loose contact, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire to the sensor has no contact with the body (ground)
- 3Check that the wiring to the sensor has no open circuit, and gently move it while measuring
- 4If you have a diagnostic tool: read the sensor temperature in live data with the engine warm and see whether it differs clearly from what you expect
- 5If the fault remains, have a workshop measure the sensor resistance and check the wiring
Symptomer du kan merke1
- A message appears in the information display
Hva feilen kan påvirke1
- The control module uses a calculated value for the temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.