VOLVO
ECM-2C5D - Injector cyl 6. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (1999–2006), XC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The signal to the injector for cylinder 6 is too low. The fault may come from a signal wire shorted to ground or from a damaged injector.
Mulige årsaker
- Short to ground in the signal wire to cylinder 6
- The injector for cylinder 6 is damaged
Hva du kan gjøre
- 1Clear the code and road test to see whether it returns
- 2Inspect the wiring to cylinder 6 for chafing where it may have been pressed against the body
- 3Use a multimeter to check that the wire to cylinder 6 has no contact with ground
- 4If you have a diagnostic tool: read the cylinder 6 signal in live data with the engine at idle
- 5If the wiring is intact but the fault remains, have a workshop check the cylinder 6 injector
Symptomer du kan merke2
- The malfunction indicator lamp (MIL) is on
- The engine is not running on all cylinders
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.