VOLVO
ECM-3050 - Camshaft sensor/Flywheel sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The control module compares the engine speed from the crankshaft speed sensor with the speed calculated from the camshaft position sensor. If the crankshaft speed sensor reads lower than the camshaft sensor, the control module treats it as a fault, and the code is stored while the engine runs. The cause may be broken wiring, poor contact, or a damaged speed sensor or trigger wheel.
Mulige årsaker
- Open circuit in the signal or ground wire
- Signal wire short-circuited to ground or supply voltage
- Contact resistance in the connections
- Damaged engine speed sensor
- Damaged trigger wheel on the crankshaft
Hva du kan gjøre
- 1Read the fault status with the engine running and check whether the fault is still present when the test has finished
- 2Check that the connectors to the engine speed sensor and camshaft position sensor are secure and free from oxidation
- 3Check that the engine speed sensor and camshaft position sensor are correctly fitted
- 4Use a multimeter to check that the signal wires to the engine speed sensor are not broken and have no contact with ground or supply voltage
- 5If the fault remains: have a workshop check the trigger wheel on the crankshaft and the engine speed sensor
Symptomer du kan merke2
- The engine cranks but will not fire
- The engine stops
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.