VOLVO
ECM-311D - Misfire cylinder 1. Emissions impact
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (22)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
Misfires on cylinder one during the first revolutions after the engine starts affect the exhaust emissions. The code indicates that cylinder one is the one misfiring, and it is checked while the engine runs. The causes lie in the fuel system, the intake or the ignition, and are often the same as for misfires on other cylinders.
Mulige årsaker
- Air leakage
- Blocked crankcase ventilation
- Blocked or leaking injector
- Faulty fuel pressure
- Contaminated or incorrect fuel
- Engine never reaches full operating temperature across repeated cold starts
Hva du kan gjøre
- 1First investigate the other fault codes that affect camshaft control or the camshaft reset valve
- 2Check the fuel level in the tank and that the engine oil level is correct
- 3Check the crankcase ventilation for blockages
- 4Check the spark plug on cylinder one
- 5Check the intake system for leaks
- 6If the fault remains, have a workshop check the fuel pressure
Symptomer du kan merke4
- Engine warning lamp lit
- The engine misfires
- Poor performance
- Uneven idle
Hva feilen kan påvirke2
- Rear oxygen sensor control is switched off
- Lambda control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.