Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-3220
    VOLVO

    ECM-3220 - Misfire cylinder 2, start-up. Start up

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    2 modeller

    S80 (1999–2006), XC90 (2003–)

    Vis modeller per årsmodell og motor (2)
    • Volvo S80 (1999–2006)2005–2006Kun motor: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Kun motor: B6294T

    Hva betyr feilkoden?

    The engine has misfired on cylinder two during the first revolutions after it was started. The control module stores the code when the misfires are detected during starting, which means cylinder two. The causes lie in the fuel system, the intake or the crankcase ventilation.

    Mulige årsaker

    • Low fuel level
    • Engine never reaches full operating temperature across repeated cold starts
    • Contaminated or incorrect fuel
    • Air leakage
    • Blocked or leaking injector
    • Faulty fuel pressure

    Hva du kan gjøre

    1. 1First investigate the other fault codes that affect camshaft control or the camshaft reset valve
    2. 2Check the fuel level in the tank and the engine oil level
    3. 3Check the spark plug on cylinder two
    4. 4Check the intake for leaks and the crankcase ventilation for blockages
    5. 5Check that the fuel suits the season
    6. 6If the fault remains, have a workshop check the fuel pressure and the compression

    Symptomer du kan merke4

    • Engine warning lamp lit
    • The engine misfires
    • The engine is difficult to start
    • Uneven idle

    Hva feilen kan påvirke2

    • Rear oxygen sensor control is switched off
    • Lambda control is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.