VOLVO
ECM-34E0 - Knock sensor (KS), offset. Signal too high/Signal too low. Intermittent fault
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
6 modellerC70 Cabriolet (1998–2005), S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (17)
- Volvo C70 Cabriolet (1998–2005)2003–2005
- Volvo S60 (2001–2009)2001Alle motorer unntatt: B5244S, B5244S2, D5244T
- Volvo S60 (2001–2009)2002Kun motor: B5204T5, B5234T3, B5234T7, B5244T3
- Volvo S60 (2001–2009)2003Kun motor: B5204T5, B5234T3, B5234T7, B5244T3, B5254T2
- Volvo S60 (2001–2009)2004Kun motor: B5204T5, B5234T3, B5234T7, B5254T2, B5254T4
- Volvo S80 (1999–2006)1999–2000Alle motorer unntatt: B5244S, B5244S2, D5252T MSA 15.8
- Volvo S80 (1999–2006)2001Kun motor: B5204T5, B5234T7, B5244T3, B6284T, B6294S
- Volvo S80 (1999–2006)2002Kun motor: B5204T5, B5234T7, B5244T3, B6294S2, B6294T
- Volvo S80 (1999–2006)2003Kun motor: B5204T5, B5234T7, B5244T3, B5254T2, B6294S2, B6294T
- Volvo S80 (1999–2006)2004Kun motor: B5204T5, B5234T7, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2000Alle motorer unntatt: D5252T MSA 15.8
- Volvo V70 (2000–2008)2001–2002Kun motor: B5204T5, B5234T3, B5234T7, B5244T3
- Volvo V70 (2000–2008)2003Kun motor: B5204T5, B5234T3, B5234T7, B5244T3, B5254T2
- Volvo V70 (2000–2008)2004Kun motor: B5204T5, B5234T3, B5234T7, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2004Alle motorer unntatt: D5244T
- Volvo XC90 (2003–)2003–2004Alle motorer unntatt: D5244T
Hva betyr feilkoden?
The zero level of the knock signal is shifted, meaning an offset, and the cause is a fault in the engine control module knock control circuit. The fault is stored as intermittent and may not be active at the moment. The signal may show up as either too high or too low.
Mulige årsaker
- Fault in the engine control module knock control circuit
Hva du kan gjøre
- 1Clear the code and road test the car to see whether it returns
- 2Check that the engine control module connectors are secure and free from corrosion
- 3If you have a diagnostic tool: read the fault status and see whether the code is active at the moment
- 4If the fault returns, have a workshop check the control module with diagnostic equipment
Symptomer du kan merke1
- Malfunction indicator (emissions lamp) is lit
Hva feilen kan påvirke2
- Safety retardation of ignition timing
- Reduced boost pressure
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.