VOLVO
ECM-351C - Ignition coil cylinder 2, signal. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (13)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The control module checks the signal to ignition coil 2 and sets the code when it is too high. The code identifies ignition coil 2.
Mulige årsaker
- Signal wire shorted to supply voltage
- Damaged ignition coil
Hva du kan gjøre
- 1Clear the code and road test the car to see whether it comes back
- 2Check that the connector at ignition coil 2 is secure and clean
- 3Inspect the wire to ignition coil 2 for chafing or pinched sections
- 4Use a multimeter to check whether the wire to coil 2 touches battery positive
- 5If the fault remains, have a workshop check the coil with diagnostic equipment
Symptomer du kan merke2
- Malfunction indicator (emissions lamp) is lit
- The engine does not fire on every cylinder
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.