VOLVO
ECM-3600 - Engine shut down. Does not stop when the fuel is shut-off
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2001Kun motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Kun motor: D5244T
- Volvo S80 (1999–2006)2002–2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Kun motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Kun motor: D5244T
- Volvo XC90 (2003–)2003–2006Kun motor: D5244T
Hva betyr feilkoden?
The engine does not stop straight away when the ignition is switched off, because engine speed does not fall as quickly as it should. The code is set when the speed has not dropped far enough within a set time after switch-off. The cause can be oil leaking from the crankcase into the intake, or a faulty engine control module.
Mulige årsaker
- Oil leaking from the crankcase into the intake system
- Faulty engine control module
Hva du kan gjøre
- 1Check that the engine oil level is not above the maximum mark on the dipstick
- 2Check the oil condition, since very dirty oil can block the ventilation channels
- 3Check that the hoses to the oil trap are not blocked and that the oil trap itself is clean
- 4Look for internal dirt in the intake manifold
- 5Have a workshop check engine compression and crankcase ventilation with diagnostic equipment
Symptomer du kan merke2
- The engine cannot be switched off
- The engine does not stop immediately when the ignition is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.