VOLVO
ECM-360B - Ignition coil cylinder 1. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module has found that the signal from the ignition coil for cylinder 1 is missing. Without a control signal the coil cannot fire its spark reliably, so cylinder 1 can misfire. The fault may lie in poor contact, a break in the wire or in the ignition coil itself.
Mulige årsaker
- Poor contact in the connectors
- Open circuit in the signal wire
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector at ignition coil 1 is fully seated and dry and clean
- 2Look for chafing or pinch damage on the signal wire from the coil
- 3Use a multimeter to check that the wire has no break, with the connector unplugged at the coil
- 4Read and clear the code, then road test
- 5If the wire is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- Malfunction indicator lamp is on
- Not every cylinder is firing
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.