VOLVO
ECM-360C - Ignition coil cylinder 1. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The ignition coil for cylinder 1 receives a signal that is too high, according to the engine control module. The fault concerns the signal wire between the control module and the coil, which may be short-circuited to supply voltage. The coil may then be controlled incorrectly, and the fault stays until the wire or the coil has been dealt with.
Mulige årsaker
- The signal cable has a short to supply voltage
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connectors to ignition coil 1 and to the control module are fully seated
- 2Follow the cable from the coil and look for chafing, kinks or pinch damage
- 3Check that the cable is not trapped between metal parts or bent sharply
- 4Read the code, note that it refers to ignition coil 1, clear it and road test
- 5If the fault remains: have a workshop with diagnostic equipment check the ignition coil and the wiring
Symptomer du kan merke2
- Malfunction indicator lamp is lit
- Cylinder 1 is not working as it should
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.