VOLVO
ECM-360D - Ignition coil cylinder 1. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
Ignition coil 1 sends a signal that is too low to the engine control module, which can make cylinder 1 misfire. The fault may be a short-circuit to ground in the signal cable or a damaged ignition coil. The code belongs to cylinder 1 and to the coil that serves it.
Mulige årsaker
- Ground fault in the signal cable
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector to ignition coil 1 is clean and fully seated
- 2Look at the signal cable for chafing or pinch damage, especially where it passes edges or clips
- 3Use a multimeter to check that the signal cable to the coil has no contact with ground (the body), with the connector unplugged at the coil
- 4Read and clear the code, then road test
- 5If the cable is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- Malfunction indicator lamp is lit
- Cylinder 1 does not fire properly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.