VOLVO
ECM-361B - Ignition coil cylinder 2. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
According to the engine control module, the ignition coil for cylinder 2 has no signal, so it gets no control. The fault can lie in the connector, in the wire between the control module and the coil, or in the coil itself. Cylinder 2 can misfire for as long as the fault is present.
Mulige årsaker
- Poor contact with raised resistance at the terminals
- Break in the wire between the control module and the coil
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector to ignition coil 2 is fully engaged and free from corrosion
- 2Follow the cable between the control module and the coil and look for breaks, chafing or pinch damage
- 3Use a multimeter to check that the cable is not broken, with the connector unplugged
- 4Clear the code and road test the car to see whether it comes back
- 5If the cable is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- The malfunction indicator lamp is on
- Not all cylinders are firing
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.