VOLVO
ECM-361D - Ignition coil cylinder 2. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The ignition coil for cylinder 2 receives too low a signal, so the engine control module has set the code. The signal wire may be short-circuited to ground, but a damaged ignition coil can give the same fault. The connector and the wire are the easiest place to start.
Mulige årsaker
- Signal wire with a short to ground
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector to ignition coil 2 is fully seated and clean
- 2Look at the wiring harness at the coil for chafed spots or loose clips
- 3Check with a multimeter that the signal wire is not grounded to the body when the connector is unplugged
- 4Read and clear the code, then road test to see whether it returns
- 5If the wire is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- Malfunction indicator lamp is lit
- Cylinder 2 runs unevenly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.