VOLVO
ECM-362C - Ignition coil cylinder 3. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
According to the engine control module, the signal from the ignition coil for cylinder 3 is too high. The fault may be in the wire between the control module and the coil, which may be shorted to supply voltage, or in the coil itself. Cylinder 3 can then misfire, so the fault should be repaired.
Mulige årsaker
- Supply voltage has shorted into the signal wire
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector at ignition coil 3 is fully seated and free from corrosion
- 2Follow the cable between the control module and the coil and look for chafing, kinks or pinch damage
- 3With a multimeter you can check whether the wire has a connection to plus or to other wires
- 4Read the code, note that it refers to ignition coil 3, clear it and road test
- 5If the wire is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- The malfunction indicator lamp is on
- Cylinder 3 does not fire properly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.