VOLVO
ECM-362D - Ignition coil cylinder 3. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module reads a signal from the ignition coil for cylinder 3 that is too low. The fault can lie in the wire, which may be shorted to ground, or in the coil. As long as the signal is too low, cylinder 3 may not be fired correctly and the engine can misfire.
Mulige årsaker
- A short to ground in the wire
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector to ignition coil 3 is clean and fully seated
- 2Look at the wire from the coil for chafing or pinch damage, especially where it bends
- 3Use a multimeter to check that the wire has no connection to ground (the body), with the connector unplugged at the coil
- 4Read the code, note that it refers to ignition coil 3, clear it and road test
- 5Have a workshop confirm the condition of the coil with diagnostic equipment once the wire has been checked
Symptomer du kan merke2
- Malfunction indicator lamp is lit
- Cylinder 3 does not fire properly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.