VOLVO
ECM-364C - Ignition coil cylinder 5. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The signal from the ignition coil for cylinder 5 is too high. The fault may lie in the cable between the engine control module and the coil, where the signal may have shorted to supply voltage, or in the coil itself. Cylinder 5 can misfire when the control goes wrong.
Mulige årsaker
- Short to supply voltage in the cable between the control module and the coil
- Damaged ignition coil
Hva du kan gjøre
- 1Check that the connector to ignition coil 5 is fully seated and not corroded
- 2Follow the cable between the control module and the coil and look for chafing, kinks or pinch damage
- 3Check with a multimeter whether the cable has a connection to plus
- 4Read the code, note that it refers to ignition coil 5, clear it and road test
- 5If the cable is intact: have a workshop with diagnostic equipment check the ignition coil
Symptomer du kan merke2
- The malfunction indicator lamp is lit
- Cylinder 5 does not fire properly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.