Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-4010
    VOLVO

    ECM-4010 - EVAP canister shut-off valve. Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    7 modeller

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Vis modeller per årsmodell og motor (10)
    • Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
    • Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
    • Volvo S60 (2001–2009)2001–2002Kun motor: B5244S, B5244S2
    • Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
    • Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)1999–2002Kun motor: B5244S, B5244S2
    • Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
    • Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo V70 (2000–2008)2001–2002Kun motor: B5244S, B5244S2

    Hva betyr feilkoden?

    The signal cable to the canister shut-off valve is short-circuited to ground or supply voltage, or the circuit is open. The engine control module then cannot control the valve, and the EVAP valve is not activated. The fault can come from poor contact in the connector, a shorted cable or a defective valve.

    Mulige årsaker

    • Signal cable short-circuited to supply voltage
    • Signal cable short-circuited to ground
    • Open circuit in the signal cable
    • Defective canister shut-off valve

    Hva du kan gjøre

    1. 1Check the connector to the canister shut-off valve for contact resistance and oxidation, and make sure it is fully seated
    2. 2If you have a diagnostic tool: activate the valve with the ignition on and listen for a click
    3. 3If the valve works after the connector has been checked, poor contact may have been the cause: check the connector and the wire carefully
    4. 4Follow the wire from the valve and look for chafing, kinks or a short to the body
    5. 5Have a workshop replace the canister shut-off valve if the fault remains after these checks

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Hva feilen kan påvirke1

    • The EVAP valve is not activated

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.