VOLVO
ECM-420D - Evaporative emission system (EVAP). Closed
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The fault code indicates that the EVAP system is closed, meaning the valve is not letting fuel vapours through as it should. The engine control module activates EVAP control and checks whether the idle air trim or the lambda trim changes. If nothing changes, this is interpreted as a damaged EVAP system, and a blocked hose may be the reason.
Mulige årsaker
- Hose from the canister to the EVAP valve is blocked
- Blocked hose between the EVAP valve and the intake manifold
- Damaged EVAP valve
Hva du kan gjøre
- 1Check the canister-to-valve hose for kinks, clogging or blockage
- 2Check the hose between the EVAP valve and the intake manifold for kinks, blockage and leaks
- 3Have you got a diagnostic tool: activate the EVAP valve and check in live data whether the fuel trim changes when the valve opens
- 4Have a workshop run a vacuum test on the EVAP valve if the hoses are intact and clear
- 5Clear the fault code after the repair and test drive the car to see if it returns
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) is on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.