Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-432A
    VOLVO

    ECM-432A - Leak diagnostic unit, valve. Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    7 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008)

    Vis modeller per årsmodell og motor (11)
    • Volvo C30 (2007–2013)2007–2011Kun motor: B5244S4
    • Volvo C70 (2006–2013)2006–2011Kun motor: B5244S4
    • Volvo S40 (2004–2013)2004Kun motor: B5244S4
    • Volvo S40 (2004–2013)2005–2010Kun motor: B5244S4, B5244S7
    • Volvo S60 (2001–2009)2003–2006Kun motor: B5244S, B5244S6
    • Volvo S60 (2001–2009)2007–2009Kun motor: B5244S
    • Volvo S80 (1999–2006)2003–2006Kun motor: B5244S
    • Volvo V50 (2004–2013)2004Kun motor: B5244S4
    • Volvo V50 (2004–2013)2005–2010Kun motor: B5244S4, B5244S7
    • Volvo V70 (2000–2008)2003–2006Kun motor: B5244S, B5244S6
    • Volvo V70 (2000–2008)2007–2008Kun motor: B5244S

    Hva betyr feilkoden?

    After the reference phase the airflow is switched over to the fuel tank system to pressurise it, and the pump current falls briefly at this switchover. If the current falls too slowly or not at all, the engine control module interprets this as a damaged valve in the pump and sets the fault code. The leak diagnosis is interrupted while the fault is present.

    Mulige årsaker

    • Dirt or moisture in the pump
    • Valve in the pump stuck
    • Damaged leak diagnostic pump

    Hva du kan gjøre

    1. 1Have a workshop check the engine control module software on cars of model year 2003 to 2008 before the leak is searched for
    2. 2Have you got a diagnostic tool: start the quick test with the ignition on and check that it moves on from the reference phase
    3. 3Clean and dry the connector of the leak diagnostic unit if it is damp or dirty
    4. 4If the fault remains after the connector has been dried, have a workshop look for a stuck valve in the pump
    5. 5Have a workshop with diagnostic equipment run a quick test of the fuel tank system after the repair to check that the problem is solved

    Symptomer du kan merke1

    • Malfunction indicator lamp (MIL) is on

    Hva feilen kan påvirke1

    • The leak diagnosis is interrupted

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.