Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-4380
    VOLVO

    ECM-4380 - Fuel tank filler cap. Missing

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (14)
    • Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
    • Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2008Kun motor: B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
    • Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
    • Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
    • Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
    • Volvo XC90 (2003–)2015

    Hva betyr feilkoden?

    The fault code is set after refuelling when the leak diagnosis shows a leak, and this is interpreted as the filler cap being missing or not seated correctly. It does not occur alone; it lasts only one operating cycle and shows a warning text on the display saying the cap is not in place.

    Mulige årsaker

    • Fault code is caused by another stored fault code for the filler cap

    Hva du kan gjøre

    1. 1Check the position of the filler cap and that it is fully tightened
    2. 2Remedy the other fault code for the filler cap first, and this one should clear with it
    3. 3Look at the seal in the filler cap and replace it if it is damaged
    4. 4Drive the car at a steady speed for a while after start so the leak check runs, and see whether the message returns
    5. 5Have a workshop read the fault codes in the engine control module if the message remains

    Symptomer du kan merke1

    • Text message in the display saying the filler cap is not in place

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.