VOLVO
ECM-4410 - EGR valve. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module follows the signal from the module's built-in power stage that drives the EGR motor. If the signal is incorrect the fault code is set, and EGR control is lost. The fault can come from the signal wire being short-circuited to supply voltage, a damaged position sensor or a damaged EGR valve.
Mulige årsaker
- Signal wire short-circuited to supply voltage
- Damaged position sensor
- Damaged EGR valve
Hva du kan gjøre
- 1Have a workshop disconnect the engine control module connector and check the signal wire for a short circuit to positive
- 2Use a multimeter to check that the signal wire has no contact with positive with the engine switched off
- 3Look for pinched or chafed wiring to the EGR valve
- 4Repair the short circuit and clear the fault code
- 5Have a workshop check the position sensor and the EGR valve if the fault returns
Symptomer du kan merke1
- Message in the display
Hva feilen kan påvirke1
- No exhaust gas recirculation (EGR) control
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.