VOLVO
ECM-441D - Exhaust gas recirculation (EGR) control. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The engine control module (ECM) controls the EGR valve, which feeds part of the exhaust back into the engine to lower emissions. The ECM has received a signal from the valve or its wiring that does not match the expected EGR control, so the EGR function is faulty.
Mulige årsaker
- Poor contact, contact resistance or oxidation at the EGR valve connector
- Wiring to the EGR valve shorted to supply voltage
- Wiring to the EGR valve shorted to ground
- Break in the wiring to the EGR valve
- EGR valve overheated
- Damaged EGR valve
Hva du kan gjøre
- 1Read off the fault code, erase it and test-drive the car to see whether it returns
- 2Inspect the EGR valve connector for loose contacts, contact resistance and oxidation
- 3Look for breaks and chafing in the wiring to the EGR valve
- 4If you have a diagnostic tool: check in live data that the EGR valve position changes when the engine speed rises
- 5Have a workshop with diagnostic equipment check the valve and measure the signals if the fault returns
Symptomer du kan merke3
- Emissions warning lamp (MIL) lit
- Message shown in the text display
- Check engine light lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.