VOLVO
ECM-443B - Fuel level sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2006Kun motor: B5204T5, B5254T2
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2006–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
Fuel information reaches the engine control module through the central electronic module (CEM). The code concerns a signal that is too low, and it is set when the engine control module has a communication problem with the CEM. The code is set in the CEM first and then in the engine control module.
Mulige årsaker
- One of the CAN wires has a break
- The CAN wires are shorted to each other
- Another module on the same part of the CAN network has an internal fault
Hva du kan gjøre
- 1Start by reading the fault codes in the CEM and remedying what is found
- 2Erase the codes in the CEM once they are remedied, then remove this code
- 3Look at the connectors on the CAN network and see whether any are loose or corroded
- 4If the fault remains, have a workshop with diagnostic equipment measure the CAN network to see where communication breaks
Symptomer du kan merke1
- Fuel gauge shows the wrong level, often too low
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.