VOLVO
ECM-4480 - EGR position sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module monitors the signal from the position sensor on the EGR valve. The code is set when the signal is judged to be incorrect, and EGR control then stops. The fault can lie in the connectors, the signal wire, the supply to the sensor or the sensor itself.
Mulige årsaker
- Poor contact, contact resistance or oxidation in the connections, or a break in them
- Break in the signal wire from the position sensor
- No voltage supply to the position sensor
- Damaged position sensor
- Position sensor has stopped working
- Electromagnetic interference can sometimes have triggered the code
Hva du kan gjøre
- 1Note the fault code, erase it and test-drive to see whether it returns
- 2Check that the EGR valve can be closed and opened fully without sticking, since a sticking valve can give the same code
- 3If you have a diagnostic tool: activate the EGR valve several times and see whether it moves more freely afterwards
- 4Check the position sensor connector for contact resistance and oxidation, and look for a break in the signal wire
- 5If the fault remains, have a workshop with diagnostic equipment measure the supply and signal to the position sensor
Symptomer du kan merke1
- Message shown in the text display
Hva feilen kan påvirke1
- No EGR control takes place
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.