VOLVO
ECM-4490 - EGR position sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The position sensor on the EGR valve reports a signal that is too high, and the engine control module sets the code when the signal is judged to be incorrect. EGR control then does not take place. The fault can lie in the signal wire, the EGR valve or the position sensor.
Mulige årsaker
- Signal wire shorted to supply voltage
- EGR valve sticks
- Damaged position sensor
- An electromagnetic field can give the code
Hva du kan gjøre
- 1Read off and note the fault code, erase it and test-drive to see whether it returns
- 2See whether the EGR valve can be closed and opened fully without sticking
- 3If you have a diagnostic tool: activate the EGR valve several times and see whether it moves more freely afterwards
- 4Check the signal wire for a short to supply voltage, and the connectors for loose contacts and oxidation
- 5If the fault remains, have a workshop with diagnostic equipment examine the position sensor and the signal wire
Symptomer du kan merke1
- Message shown in the text display
Hva feilen kan påvirke1
- No EGR control takes place
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.