VOLVO
ECM-513B - Malfunction indicator lamp (MIL), transmission control module (TCM). Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) has registered that the transmission control module (TCM) has asked for frozen values to be saved, and the code is set then. The signal that concerns the warning lamp is therefore missing in the engine control module.
Mulige årsaker
- Fault in the transmission control module (TCM), which should be troubleshot first
Hva du kan gjøre
- 1Troubleshoot the transmission control module (TCM) first: read off its fault codes and remedy them
- 2The code in the engine control module cannot be erased until the TCM fault is erased, so erase it last
- 3If you have a diagnostic tool: check which codes are held in the transmission control module to see where the problem is
- 4Have a workshop examine the transmission control module if its fault codes cannot be remedied
Symptomer du kan merke1
- Symptoms depend on which fault is held in the gearbox module
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.