VOLVO
ECM-5200 - Starter motor signal. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), C70 (2006–2013), C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (2004–2013), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V50 (2004–2013), V70 (1997–2000), V70 (2000–2008)
Vis modeller per årsmodell og motor (27)
- Volvo C30 (2007–2013)2007–2011Kun motor: B5244S4
- Volvo C70 (2006–2013)2006Alle motorer unntatt: B5254T3
- Volvo C70 (2006–2013)2007–2010Kun motor: B5244S4, B5244S5
- Volvo C70 (2006–2013)2011Kun motor: B5244S4
- Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
- Volvo S40 (2004–2013)2004Kun motor: B5244S4, B5244S5
- Volvo S40 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7
- Volvo S60 (2001–2009)2001, 2009Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V50 (2004–2013)2004Kun motor: B5244S4, B5244S5
- Volvo V50 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7
- Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
Hva betyr feilkoden?
The engine control module (ECM) senses when the start position of the ignition switch is used. If the engine is turning at high speed without the start position having been registered, this is read as a signal that is too low, and the code is set.
Mulige årsaker
- Signal wire from the ignition switch shorted to ground
- Break in the signal wire from the ignition switch
Hva du kan gjøre
- 1Read off the fault codes in the central electronic module (CEM), since the code may be stored there
- 2Check the fuse for the start position circuit and that it is intact
- 3With a multimeter you can look for a break and a short to ground in the signal wire from the ignition switch
- 4Have a workshop check the wire if the fault returns
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.