Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-5320
    VOLVO

    ECM-5320 - Vehicle speed signal (VSS). Faulty signal

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2007Kun motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
    • Volvo S40 (2004–2013)2006–2007Kun motor: B5254T3
    • Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
    • Volvo V50 (2004–2013)2006–2007Kun motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7

    Hva betyr feilkoden?

    The engine control module (ECM) compares the vehicle speed reported by the brake control module (BCM) with engine speed when fuel supply is cut, for example during engine braking. If the speed appears too low for a longer time, the code is set and the speedometer may show a wrong value.

    Mulige årsaker

    • Wrong vehicle speed reading from the brake control module (BCM)
    • Dirt on the wheel speed sensors, which makes the speed signal too low

    Hva du kan gjøre

    1. 1Check that the wheel sensors are clean and that no debris is stuck to them, since dirt can make the speed signal too low
    2. 2Read and fix the codes in the brake control module (BCM) first, since the speed signal comes from there
    3. 3If you have a diagnostic tool, compare the speed value in live data with the speedometer during a test drive and see whether it follows the car's speed
    4. 4The brake control module (BCM) is part of the braking system: do not work on it or its wiring yourself. Have a workshop check it if the fault remains
    5. 5Clear the code only once the cause is fixed, then road test to see whether it returns

    Symptomer du kan merke2

    • The environment lamp lights up
    • The speedometer shows a wrong value

    Hva feilen kan påvirke2

    • On cars with a manual gearbox, the speed signal is set to a default value
    • On cars with an automatic gearbox, a secondary speed signal from the transmission control module (TCM) is used instead

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.