VOLVO
ECM-5600 - Oil level sensor. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS60 (2001–2009), V70 (2000–2008)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) checks the oil level sensor. Although the code is named signal missing, it is also set when the reading is too high or too low. The causes are in the wiring, in the connectors, or in the sensor itself.
Mulige årsaker
- Signal wire shorted to voltage
- Faulty oil level sensor
- Signal wire shorted to ground
- Play, raised contact resistance or oxidation in the connectors
- Break in the signal wire
- Break in the supply voltage
Hva du kan gjøre
- 1Check that the connector at the oil level sensor is fully seated and free from oxidation and contact resistance
- 2With a multimeter, check that the signal wire has no contact with voltage or ground and is not broken
- 3If you have a diagnostic tool, read the oil level value in live data with the engine running and see whether it is too high, too low or missing
- 4If ECM-5630 is also stored, fix the fault for this code first
- 5If the fault remains, have a workshop try a new oil level sensor
Symptomer du kan merke2
- The oil pressure lamp lights up or behaves abnormally
- Warning lamps and warning signals light up or behave abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.