VOLVO
ECM-5610 - Oil quality, level and temp sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
Hva betyr feilkoden?
The ECM keeps track of engine oil condition through one combined sensor for temperature, level and quality. The code is set when the oil quality reading is faulty, and a message is shown in the text display. Although the code is named signal too low, the causes can lie in either a high or a low reading, such as wiring, connectors, or contaminated oil.
Mulige årsaker
- Contaminated engine oil
- Poor quality engine oil
- Signal wire shorted to voltage
- Signal wire shorted to ground
- Raised contact resistance or oxidation in the connector terminals
- Damaged oil level sensor
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Check that the oil is the correct grade and not contaminated, and change it if needed
- 3Check the connector at the sensor and look for oxidation or loose contacts
- 4With a multimeter, check that the signal wire has no contact with voltage or ground
- 5If you have a diagnostic tool, read the oil quality and oil level values in live data with the ignition on and see whether either is unreasonable
- 6If the fault remains, have a workshop check the sensor and replace it if needed
Symptomer du kan merke1
- A message is shown in the text display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.