VOLVO
ECM-5730 - Communication, Transmission Control Module (TCM). Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) has detected a fault in the reading coming from the transmission control module (TCM), and the code is stored. The accelerator pedal responds poorly, and engine torque is limited to a calculated reasonable value. The cause may lie in the CAN communication or in the transmission module.
Mulige årsaker
- Faulty CAN communication
- The fault lies in the transmission control module (TCM)
Hva du kan gjøre
- 1Read and note the codes in the transmission control module (TCM) first
- 2Then read the CAN-related codes in the CEM and fix the faults there
- 3Check that the connectors on the CAN network are fully seated and free from oxidation
- 4Clear the code only once the causes are fixed, then road test
Symptomer du kan merke3
- The accelerator pedal responds poorly
- A message is shown in the text display
- The environment lamp lights up
Hva feilen kan påvirke1
- Requested engine torque is limited to a calculated reasonable value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.